Posts Tagged ‘PwnageTool’
But don’t worry…our PwnageTool program — when it’s updated for 3.1 — will let you update your main firmware without touching your baseband firmware, so you can still have the best of both worlds. But you must be diligent about saying “no” to your iTunes request this week to update your firmware.
Update: We’re currently working on PwnageTool for 3.1, and will be sure to let you know when it’s available!
What’s old is new again
Last night we released updated versions of our redsn0w jailbreak and ultrasn0w carrier unlock. These versions are now compatible with the iPhone 3GS running at 3.0. Welcome aboard, 3GS owners! (The tools of course remain compatible with all of the other platforms too.) Also last night, saurik released 3GS-compatible versions of MobileSubstrate and WinterBoard, components that enable many different add-ons and themes.
We realize we upset some folks (e.g. existing 3GS owners) with our earlier announcement that we wanted to hold onto the 3GS iBoot-family hole until 3.1 was out. Our aim there was to get as many people as possible onboard (within reason of course) before revealing the hole, since Apple will fix it immediately. But all of that became moot when the purplera1n release was made, since it uses the same hole.
For those of you who already own 3GS phones, the outlook is bright. As long as you have your personalized (signed) dfu/img3 files, you’ll always be able to jailbreak (even if you slip up and install stock Apple firmware in the future). For those of you without 3GS phones, it’s a race against the clock to use this particular hole. There’s nothing we can do about that, but we will always be looking for new holes.
ultrasn0w unlockers — You all must remain particularly vigilant against upgrading your basebands, since doing so will kill the unlock (for most phones, there’s no going backwards in baseband version). Apple has gotten very serious with the latest baseband — they’ve removed 180 (!) commands in an effort to cut down their exposure to holes. So please always stay away from stock Apple IPSWs and instead use our tools as we release them. These tools let you update your firmware without updating your baseband.
Those installing ultrasn0w will probably also need to do a single run of Settings->General->Reset->Reset Network Settings. We’re testing various fixes for that particular glitch.
Once again, thanks to @Oranav for finding the new injection vector that allowed us to transform yellowsn0w for baseband 02.28 into ultrasn0w for baseband 04.26, and for not revealing it to Apple before it could be used where it would be most effective — firmware 3.0.
redsn0w platforms — This is the first redsn0w release that also supports linux! It’s the newest version of the bunch, so any feedback would be appreciated. But right now, redsn0w should work on OS X, Windows, and linux.
How to get the goods:
- The redsn0w torrent seeds are all here. Any direct mirroring help would also be appreciated.
- The updates to ultrasn0w, MobileSubstrate, and WinterBoard are all handled directly through Cydia (after you’ve jailbroken!)
- The Cydia repo for ultrasn0w is http://repo666.ultrasn0w.com (that last o in ultrasn0w is the number 0!)
Credit: iclarified
This tutorial will show you how to jailbreak and unlock your 2G iPhone on the 3.0 iPhone firmware.
You can find the 3G version of this tutorial: here.
Unfortunately PwnageTool is not available for Windows yet. You will need to use QuickPwn to jailbreak. You can find those instructions here when they become available.
Make sure you have iTunes 8.2 then continue…
Alright, first make a folder on the desktop. In it, you will need a couple of things. The two bootloader files 3.9BL, 4.6BL, and Pwnage 3.0, found here
You will also need the 3.0 iPhone firmware.
3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw
When downloading the IPSW file, it is best to download it with Firefox!
Step One
Create a folder on your desktop with all the required files listed above.
Step Two
Double click to mount the PwnageTool dmg.
Drag the PwnageTool icon to the Pwnage folder then launch it.
Click Ok if presented with a warning.
Step Three
Make sure you click Expert Mode from the top menu.
Step Four
Select your iPhone or iPod from the three devices shown. Notice a large checkmark appears over the selected device. Then click the blue arrow button at the bottom right.
Step Five
You will be brought to the “Browse for IPSW” page. On my laptop, it automatically found the IPSW. If PwnageTool doesn’t automatically find the ipsw file you can click Browse for IPSW… button.
Click to select the found IPSW file, a checkmark will appear next to it. Then click the blue arrow button to continue.
Step Six
You will then be brought to a menu with 7 choices. Click to select General then click the blue arrow button.
The General settings allows you to decide the partition size. Click activate the phone and Disable partition wipe-out. Click the blue arrow button.
***If the Enable Baseband checkbox is not greyed out, checkmark it. This will allow the unlock to occur!***
***For the 3.0 firmware you may have to increase the size of your root partition slightly for the IPSW build to be successful. 590MB worked just fine for me***
In the Bootneuter settings, click Neuter bootloader, Unlock baseband, and Auto-Delete BootNeuter.app. It is not necessary to upgrade the bootloader unless you are really feeling the need to be on 4.6. Click the blue arrow button to continue.
The Cydia settings menu allows you to create custom packages so you do not have to manually install the necessary them later.
Click to select the Download packages tab. Then click the Refresh button to display all the available packages. Double clicking the package you want will download it and make it available in the Select Packages tab.
Checkmark the ones you want then Click the blue arrow button.
The Custom Packages Settings menu displays listed package settings for your custom IPSW. For know leave these settings as is. Click the blue arrow button to continue.
The Custom Logos Settings menu allows you to add your own images as boot logos. Click the Browse button to select your Boot logo and Recovery logo.
Remember the rules for them: RGB or Grayscale format with Alpha channel and dimension bellow 320×480. If you would like to use the iClarified ones they can be found here: Boot Logo, Recovery Logo
Click the blue arrow button to continue.
Step Seven
You are now ready to build your custom firmware. Click the build button to select it, then click the blue arrow button.
Step Eight
If this is the first time doing this, you will be asked to upload the 3.9 and 4.6 BL files. When prompted to search the web, click no.
You will prompted to browse for the 3.9BL file. Click Yes then select the file(BL-39.bin) from the Pwnage folder you created on your desktop and click the Open button.
Select the file in the Pwnage folder on your desktop and click the Open button.
Do the same for 4.6.
***: After loading the 4.6 BL you may be asked if you’re a legit user. If you legally have ATT or an iPhone plan in a different country, clicking yes will not unlock the iPhone and activate it as your legal plan already activates it and there is no need for an unlock. However if you wish to keep the iPhone unlocked, when asked if you’re a legit iPhone user, click no
Step Nine
After both are found. You will be asked to save your custom .ipsw file. Save it to your Pwnage folder on the desktop.
Step Ten
Your custom IPSW is now being built. Please allow up to 10 minutes.
If prompted enter your Administrator password and click the OK button.
When prompted if your iPhone has been Pwned before, we clicked No. It allows for a more thorough restore.
You will be asked to turn off the device. Make sure it is connected to the USB port.
Step Eleven
Be ready to follow directions now. It will ask you to hold the home button and the power button for 10 seconds. Then, you will have to release the power button and hold the home button for 10 seconds to enter DFU.
If you fail, it will show you a message. Click Yes. Unplug the iPhone from the USB. Turn it off, then turn it back on. Plug it back into the USB and turn off the iPhone when prompted.
When done correctly, Pwnage 2.0 will display a message telling your that it successfully entered DFU mode. iTunes will also pop-up.
Step Twelve
In iTunes, hold the Alt/Option key and click Restore.
Step Thirteen
Navigate to the Pwnage folder on your desktop using the dialog window that appears. Select the custom IPSW that was created (iPhone1,1_3.0_7A341_Custom_Restore.ipsw) and click the Open button.
Step Fourteen
Once the restore has completed, it will restart your iPhone. The phone will then launch BootNeuter.app to unlock your device.
Please allow 5 minutes for this to complete. Your iPhone will restart once completed.
thank http://www.iclarified.com
เชื่อว่าหลายคนชะเง้อคอรอ Dev Team ปล่อยของกันมาตั้งแต่เที่ยง ๆ ของวันนี้ ถึงตอนนี้ก็คงได้สมใจกันแล้ว เพราะทาง Dev Team ได้ทำาการอันเชิญ PwnageTool 3.0 เพื่อทำการแหกคุก (Jailbreak) ให้ iPhone/iPod touch ของคุณลงมาสู่อินเตอร์เน็ตเรียบร้อยแล้ว โดย PwnageTool 3.0 เวอร์ชั่นนี้ออกมาสำหรับทำการแหกคุกให้ iPhone, iPhone 3G และ iPod touch 1G เท่านั้น
สำหรับ iPhone 3G ต้องขอเตือนว่านี่ยังไม่ใช่การปลดล็อกเครื่อง เพราะทาง Dev Team ยังไม่ได้ใส่ UltraSn0w มาด้วย โดยบอกว่าจะทำการใส่ UltraSn0w เข้ามาใน Cydia และ icy เร็ว ๆ นี้ ฉะนั้นถ้าเครื่องของคุณเป็นเครื่องที่ล็อกมาเช่นเครื่องมาจากอเมริกา, อังกฤษ ฯลฯ อย่าเพิ่งทำการใด ๆ กับเครื่องของคุณ แต่ถ้าเป็นเครื่องที่เป็น Factory Unlock เช่นเครื่องของประเทศฮ่องกง หรือเครื่องที่ซื้อจาก true move สามารถทำการ Jailbreak ได้ทันที
ขั้นตอนการทำเหมือน ๆ กับของเดิมคือทำการสร้าง Custom Firmware ใหม่แล้วนำเฟิร์มแวร์ที่ได้มาใส่ลงไปใน iPhone/iPod touch ของคุณ
This is the low down on our tools for use with the 3.0 firmware from Apple, read the whole post in full before attempting anything. Because of some bugs and unexpected changes this will be a multipart release, starting with the release of PwnageTool for Mac OS X. QuickPwn for Mac OS X and Windows will follow sometime soon, please don’t bug us about it, we are working flat out to get everything finished to release them.
- GOLDEN RULE: If you are using a 3G iPhone with yellowsn0w and rely on yellowsn0w to obtain cellular service, then you should NOT use PwnageTool right now. UltraSn0w is not included with this release and therefore your baseband will be locked and unable to use an operator other than the official one it was bought for. UltraSn0w will be release via APT (cydia and icy) soon. If you have an original iPhone (1st generation) then 3.0 unlock works with this PwnageTool release.
- Yellowsn0w in its current form will NOT work with the baseband version that is present in the 3.0 update, you will need Ultrasn0w, which will be released sometime soon, Ultrasn0w will work with all iPhone 3G models (but not 3GS), even ones that were previously unlockable, Ultrasn0w (when available) will be released via APT (this means you can get it via Cydia or Icy).
- Please read all parts of this post before downloading and using these tools.
- Read items 1, 2 and 3 again and again.
- At the bottom of this post are the bittorrent files for the 3.0 capable version of PwnageTool.
- This app is suitable for the recent 3.0 release.
- PwnageTool will NOT work for the iPhone 3GS.
- PwnageTool WILL work for Original iPhone (1st Generation), Original iPod touch (1st Generation) and the iPhone 3G.
Baseband 101
The ‘baseband’ is the generic nickname given to the internal components of the iPhone that handle the phone calls and Internet access. This ‘baseband’ is a tiny and unique independent computer system that runs inside your iPhone, it is separate to the main system that handles the applications (such as email and google maps) and it talks to the main part of the phone over an internal communications network. Think of it like a cable modem or other peripheral that is attached to your home PC that needs occasional updates. When a software update is released and presented to you within iTunes the baseband is sometimes updated (to fix bugs or add new features). The 3.0 update for the iPhone 3G contains such an update, so running the vanilla updater straight away with iTunes will reprogram and update the baseband.
SIM Free/SP Unlocked/Factory Unlocked iPhone 3G
This applies if you bought your iPhone 3G for $$$$$$$. This model of iPhone 3G doesn’t have an Service Provider lock (aka factory unlocked) and you are able to put any SIM card into the phone and get service. Your phone is already unlocked so you do not need to worry about baseband updates, simply upgrade to 3.0 using iTunes and then use PwnageTool to create an ipsw and then use this to jailbreak your phone.
iPhone 2G (1st Generation)
Update or Restore your iPhone 2G with iTunes then use PwnageTool to do the magic, ‘nuff said, you don’t need to worry about anything, the baseband will be unlocked, the phone jailbroken.
iPod Touch 1G (Original iPod Touch)
Update to 3.0 with iTunes and use PwnageTool.
iPod Touch 2G (New iPod Touch)
Sorry, no support at this time within PwnageTool, use Redsn0w for an earlier (pre 3.0) firmware release instead.
Official Bittorrent Releases -
- http://torrents.thepiratebay.org/4963802/ SHA1 = 2e19d39398233f88ae0782fd82462a9223791f7f
Unofficial Mirrors
The following links are unofficial download mirrors, you download these at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links or archives and we accept no responsibility with regard to the validity of the files, or with other content these links provide or with the content that is on the linked site. Always check the published SHA1 sums. We would prefer that you downloaded the official bittorrent release that is linked above, but you are welcome to try these if you really must. Mirror owners should email direct links only to blog@iphone-dev.org , please don’t place mirrors in the comments as they will be deleted.
